301-2-Flute-Micro-Solid Carbide Flat End Mills-Metric-less-than-1mm
Template: 301-2-Flute-Micro-Solid Carbide Flat End Mills-Metric-less-than-1mm
ROHIT 301 Series | 2-Flute Carbide Micro End Mills | Ø0.1-0.9 mm
- Micro end mills in solid carbide for die-mold detailing, micro-cavity milling and precision component machining
- Carbide end mills from Ø0.1 mm to Ø0.9 mm, ground from ultra-fine grain carbide for maximum edge strength
- Mills hardened die steel and tool steel up to 60 HRc — D2, D3, H13, P20, SKD11 — in the hardened condition
- 2-flute geometry gives free chip evacuation in narrow slots, ribs and micro-pockets
- Reduced neck with tight concentricity control for deep, close-wall access and longer micro tool life
- Coated with the newly developed NOVA coating for wear and thermal resistance without rounding the edge
| Material | Brand | Material Grade | Special Treatment | Purpose | Type of Tool | mtm | Shank Dia (mm) | Overall Length (mm) | Number of Flutes | Series |
|---|---|---|---|---|---|---|---|---|---|---|
| Carbide | Rohit | C-3X | Nova | High Performance | Flat End Mills | STEEL55 | 4 | 50 | 2 | C301 |
| CR3AHSE00XQ7 | 0.2 | 0.4 | ₹ 1,518.00 / Nos In stock:
8 Nos |
|---|---|---|---|
| CR3AHSE00XR5 | 0.3 | 0.6 | ₹ 1,518.00 / Nos In stock:
10 Nos |
| CR3AHSE00XS2 | 0.4 | 0.8 | ₹ 1,449.00 / Nos In stock:
16 Nos |
| CR3AHSE00XT0 | 0.5 | 1 | ₹ 1,449.00 / Nos In stock:
40 Nos |
| CR3AHSE00XU8 | 0.6 | 1.2 | ₹ 1,449.00 / Nos In stock:
23 Nos |
| CR3AHSE00XV6 | 0.7 | 1.4 | ₹ 1,449.00 / Nos In stock:
34 Nos |
| CR3AHSE00XW4 | 0.8 | 1.6 | ₹ 1,449.00 / Nos In stock:
100+ Nos |
| CR3AHSE00XX1 | 0.9 | 1.8 | ₹ 1,449.00 / Nos In stock:
28 Nos |
No items match the filter.